|
|
|
P Squared Employee
Group: P Squared
Last Login: Monday, December 22, 2008 11:49:16 AM
Posts: 181,
Visits: 251
|
|
PCI 1750 to Alice AIR2000 Remote Start wiring details:
You will need a 37way Male “D” type connector for the PCI card end & 25way Male “D” type connector for the Alice mixer.
Alice Connections:
REMOTE START MY.RIAD CART 1 TO ALICE CHANNEL “A” INPUT
CONNECT PCI PIN 1
TO
ALICE PIN 22 (SIGNAL)
CONNECT PCI PIN 28
TO
ALICE PIN 10 (GROUND)
REMOTE START MYRIAD CART 2 TO ALICE CHANNEL “A” INPUT
CONNECT PCI PIN 20
TO
ALICE PIN 22 (SIGNAL)
CONNECT PCI PIN 28
TO
ALICE PIN 10 (GROUND)
REMOTE START MYRIAD CART 3 TO ALICE CHANNEL “A” INPUT
CONNECT PCI PIN 2
TO
ALICE PIN 22 (SIGNAL)
CONNECT PCI PIN 28
TO
ALICE PIN 10 (GROUND)
REMOTE START MYRIAD CART 4 TO ALICE CHANNEL “A” INPUT
CONNECT PCI PIN 21
TO
ALICE PIN 22 (SIGNAL)
CONNECT PCI PIN 28
TO
ALICE PIN 10 (GROUND)
REMOTE START MYRIAD CART 1 TO ALICE CHANNEL “B” INPUT
CONNECT PCI PIN 1
TO
ALICE PIN 24 (SIGNAL)
CONNECT PCI PIN 28
TO
ALICE PIN 12 (GROUND)
REMOTE START MYRIAD CART 2 TO ALICE CHANNEL “B” INPUT
CONNECT PCI PIN 2
TO
ALICE PIN 24 (SIGNAL)
CONNECT PCI PIN 28
TO
ALICE PIN 12 (GROUND)
REMOTE START MYRIAD CART 3 TO ALICE CHANNEL “B” INPUT
CONNECT PCI PIN 3
TO
ALICE PIN 24 (SIGNAL)
CONNECT PCI PIN 28
TO
ALICE PIN 12 (GROUND)
REMOTE START MYRIAD CART 4 TO ALICE CHANNEL “B” INPUT
CONNECT PCI PIN 4
TO
ALICE PIN 24 (SIGNAL)
CONNECT PCI PIN 28
TO
ALICE PIN 12 (GROUND)
PCI 1750:
Solder pins 9, 28 and 29 together and solder a Flying cable to these to attach to the case (using the connector screw) to ensure that the PCI1750 is properly grounded - otherwise operation can be very intermittent:
If you are using an alternative mixing desk then the mixing desk end connection needs to be altered accordingly. The PCI1750 end remains the same.
Remember, you also then have to set up the hardware inputs in Myriad:
Liam BurkeCommercial Director - P Squared Ltd Email: liamb@psquared.net Telephone: +44 1482 383700 Skype: liamdburke
|
|
|
|