|
|
|
Supreme Being
Group: P Squared
Last Login: Today @ 9:44:39 AM
Posts: 874,
Visits: 813
|
|
Although you are completely free to setup Myriad using any data locations that suit your situation, if you want some suggestions then:
On machines where Myriad will run from 'local' files, use a smaller boot partition (say 10 to 20Gb) and then format the remainder of the space as one big partition (the 'D' Drive) The same applies to network servers that will only be serving files to other Myriad workstations
Create a top level folder in this D Drive called Data, Myriad or PSquared (whichever takes your fancy!) and 'share' it using the same name - under XP and 2003, don't forget to change the Share Permissions to Read and Write, otherwise clients won't be able to access databases and the like properly.
On machines that are connecting to this computer over the network, you can either Map a Network drive to the share (we recommend the 'M' or 'P' Drive) or use it via UNC naming direct - i.e. \\Server\PSquared
For most situations, we would recommend mapping a network drive as this makes it easier for users to understand, i.e - 'I put it on the M drive' - but you run the risk of someone removing the connection and causing a few headaches. If you are doing it this way then it's worth writing a BAT file that runs from your startup group to remap the network drive should it get lost.
The advantage to the UNC method is that there is no drive mappings to get lost, but it does make it quite a bit harder to use when you want to browser for files etc.
Anyway - back to what we put in the folder:
Under this folder, create an Audiowall Folder, a Directory Folder, and a System Folder:
D:\PSquared
D:\PSquared\Audiowall
D:\PSquared\Directory
D:\PSquared\Myriad\\System
If you are running Scoop or Nexus then we suggest: D:\PSquared\Nexus
D:\PSquared\Scoop
The reason for these folder names are that these are the ones that the new Setup Wizard looks for when it's checking for an existing data store.
When setting up Myriad, 'point' the Audiowall locations at the Audiowall folder, the P Squared Contacts Directory at the Directory folder, and the Myriad System Data Location at the System Folder.
------------Bill Bailey: "No win, no fee, no basis in reality. Just a room above a minicab office in Acton and a steady stream of greedy simpletons whose delusion is only matched by their clumsiness"
|
|
|
|
|
P Squared Employee
Group: P Squared
Last Login: Today @ 10:12:44 AM
Posts: 178,
Visits: 239
|
|
While documenting the data locations section, I had a good idea.
Mapped network drives are great because it is easy for the user to navigate to the correct place should they have to but they occasionally get disconnected which stops Myriad from working.
UNC's are great because they are a direct connection to the server so there is no mapped drive to go wrong. As long as the server is running then Myriad will run. The bad thing is that Users find it hard to locate the correct location should they need to.
The answer is to use UNC's for your data locations in Myriad but them map the network drives anyway. Myriad connects directly to the server regardless of mapped drive status, and the User have a simple way of getting to the shared locations via mapped drives - the best of both worlds!
Liam
Liam BurkeCommercial Director - P Squared Ltd Email: liamb@psquared.net Telephone: +44 1482 383700 Skype: liamdburke
|
|
|
|